In-Die Quick Connect

Lubrication solution

 

uni roller s2

The In-Die Quick Connect allows Unist spray nozzles to be permanently mounted, ensuring they remain in position with each die change. With the nozzles consistently in position, you get more reliable performance whenever you use the die.

With the In-Die Quick Connect, disconnecting the lubrication lines is done with just a touch, and reattachment is a snap. Each quick connect is keyed to assure operators reattach the lines correctly, guaranteeing each nozzle sprays as programmed.

The In-Die Quick Connect utilizes integral check valves to prevent dripping and works with both Unist’s Low Volume (LV) and airless spray nozzles. This is an ideal solution when die-mounted nozzles are necessary.

    • Quickly connect and disconnect lubrication lines when changing dies
    • Reduce die setup time
    • Maintain proper nozzle placement in each die
    • Dripless design helps maintain a cleaner work area


questMark
GET A QUOTE
on an In-Die Quick Connect system now!

Note: Is your installation location different? Please let us know below!

  • Yes - Send me important Unist news/updates!
    No - Don‘t send me important news/updates.

  • ( All fields are required. )

By clicking ‘submit’, you are confirming that you have read, understood, and accepted the Unist Privacy Policy.

hrule

Ordering information


  • For Low Volume Spray Nozzles (LV), series 4210, order both die half and controller half sections. Calculate the number of die half sections based on the total number of nozzles in use and multiply by the number of dies to be outfitted. For example, if (2) LV Nozzles are used and there are (4) dies, then order (4) each 303086-2. For the mating controller half sections, order (1) each 303085-2. Note each half is keyed and marked with 1, 2, 3 or 4 holes on the upper face to identify the mating sections and provide proper orientation for connection.

  • Controller half
  • Item#Part#Description
    1303085-1controller half, LV Nozzle, position 1
    2303085-2controller half, LV Nozzle, position 2
    3303085-3controller half, LV Nozzle, position 3
    4303085-4controller half, LV Nozzle, position 4
  • Die half
  • Item#Part#Description
    1303086-1die half, LV Nozzle, position 1
    2303086-2die half, LV Nozzle, position 2
    3303086-3die half, LV Nozzle, position 3
    4303086-4die half, LV Nozzle, position 4

  • For Airless Nozzles, Series 4021 and 4022, order both die half and controller half sections. Calculate the number of die half sections based on the total number of nozzles in use and multiply by the number of dies to be outfitted and divide by two. This is because there are two fluid connection points on each die half and controller half sections. For example, if (4) Airless Nozzles are used and there are (4) different dies, order (4) each 303185-2. For the mating controller half sections, order (2) each 303184-2. Note each half is keyed and marked with 1, 2, 3, or 4 holes on the upper face to identify the mating sections and provide proper orientation for connection.

  • Controller half
  • Item#Part#Description
    1303184-1controller half, Airless Nozzle, position 1
    2303184-2controller half, Airless Nozzle, position 2
    3303184-3controller half, Airless Nozzle, position 3
    4303184-4controller half, Airless Nozzle, position 4
  • Die half
  • Item#Part#Description
    1303185-1die half, Airless Nozzle, position 1
    2303185-2die half, Airless Nozzle, position 2
    3303185-3die half, Airless Nozzle, position 3
    4303185-4die half, Airless Nozzle, position 4
Call Unist:
800.253.5462 Toll-free US & CAN
616.949.0853 Intl.
Need Help? Let's chat!
 


calculate your savings with Uni-Roller!

More Metal Forming Solutions
 

Sign up for news

©Copyright 2018 Unist, Inc.