Your browser does not support JavaScript! You will not be able to use the Product Builder.
content area

You are about to make all outputs the same. Which output would you like to copy to all others?

Configured Outputs


MACHINE TYPE: Please choose your machine type

When you choose your machine type in the drop-down above the standard MQL application system for that type of machine is automatically selected for you. In most cases, this standard system is what you will need to get started.

If you know a specific change you want to make to the system, then click on the appropriate link in the box on the left and you can make that change. For example, if you want to add an output click on Number Of Outputs: and you will be taken to the page where you can make this change.

If you are not sure about what needs to be changed, or curious about an option in the configured system, using the arrow buttons on the top will walk you through the process of specifying a system.

If you are not familiar with MQL we suggest you start with What is MQL


Thru-The-Tool?
If you will be using through-tool lubrication, please contact Unist via phone at 616.949.9503 or at salessupport@unist.com for a personal consultation.

 

SYSTEM TYPE: Please choose the type of system to configure:  

Coolubricator™
Continuous application.
Once actuated, continuous lubricant is delivered
Ideal for continuous cutting applications: Cutting, Sawing, Milling, etc.
Serv-O-Spray™
Single-Shot Application.
Once actuated, a single shot of lubricant is delivered
Ideal for intermittent applications such as tapping.

Learn more about Coolubricator™ systems
[ click for more info ]
Learn more about Serv-O-Spray™ systems
[ click for more info ]

NUMBER OF OUTPUTS: Please choose output quantity.

 

Typical Output Quantities by Application:

 

Machine Type Number of Outputs
Open Drill 1
Tapping Machine 1
Circular Saw 1 or 2 See Fluid Output Type for details. ( see below )
Band Saw 1 for blade and additional for each lube point. See Fluid Output Type for details. ( see below )
Mill 2
Machining Center 2 per spindle
Router 2 per spindle

Sawing? Read this for nozzle selection information!









PUMP STYLE: Please choose a pump type

Standard 1-Drop
(0.03 mL per stroke)

Standard 3-Drop
(0.10 mL per stroke)

MV 1-Drop
(0.045 mL per stroke)

MV 2-Drop
(0.10 mL per stroke)

?
High or low viscosity? Our standard pumps are designed to pump high viscosity fluids (oils) for MQL (Minimum Quantity Lubrication) applications and our Multi-Viscosity (MV) pumps are designed for low viscosity fluids (water-based or alcohol).

?
High or low output? For nearly all MQL applications, the standard 1-drop pump works best. For non-MQL applications or situations where you need higher output, the standard 2 or 3-drop pumps are a good choice.
?
Which pump for my fluid? Use the chart below to determine the best pump for your fluid viscosity.

Lifetime warranty on Unist pumps
when Coolube® is used exclusively!
learn more!
Lifetime Pump Warranty
  SUS Chart


ACTUATION: Please select your method of actuation.
?
What type of actuation is right for you?
Electronic: Solenoid Valve
For actuation using an electrical signal from the machine
( Available in 24, 110, 220, 440 VAC, and 12 or 24 VDC )
Electronic: Multiple Solenoid Valves
For actuation of multiple outputs using electrical signals
Pneumatic: Air Pilot Valve
For use with a low-flow air signal
Manual: Foot or Slide Valve
For manual operation by hand or by foot

?
Common Vs. Independent Actuation: In most cases you want all the pumps to turn on and off at the same time, or common actuation, but different spindles or secondary operations may require independent actuation.  Need specialized actuation? Please contact us
 

RESERVOIR: Please choose your system's reservoir.
?
Low Level Alarm - Do you need notification when the reservoir runs low? Choose a reservoir with a low level alarm.
?
Central Fluid Supply - Do you need to connect your system to a central fluid supply? Choose the air trap option.

?
Reservoir Size - Do you know how long you'd like to operate your system before refilling the reservoir? Use the calculator below:
mL/min fluid used: hours between refill:
suggested reservoir size:

ENCLOSURE AND MOUNTING OPTIONS: Choose your enclosure size and mounting option.

An enclosure protects the pump and other components of the system and helps prevent unwanted tampering or inadvertent changing of the system settings.
?
How do you want to mount?
Direct - Can vary depending on your application. Requires tools.

Magnet - bolt on magnets allow mounting to metallic surface. Requires minimal or no tools.

?
Who can change system settings?
Anyone - choose standard enclosure or no enclosure.
Restricted - choose enclosure with key.

OUTPUT: Now that the applicator has been defined, we will move to the individual nozzles (outputs)

!
Not every nozzle works with every system but the Unist Product Builder should only show output options applicable for your configuration
!
Single Vs. Dual Channel Systems: In most cases, a dual-channel system is preferred. Learn more
!
Make All Outputs The Same The Unist Product Builder gives you the option to clone all your outputs from an output you have already configured. Use the button in the left column to do this.
IMPORTANT - outputs cloned from another will lose their individual settings!

OUTPUT 1 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (0mm)






OUTPUT 1 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 1 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 2 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 2 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 2 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 3 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 3 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 3 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 4 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 4 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 4 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 5 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 5 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 5 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 6 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 6 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 6 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 7 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 7 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 7 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 8 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 8 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 8 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 9 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 9 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 9 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 10 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 10 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 10 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 11 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 11 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 11 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 12 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 12 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 12 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 13 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 13 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 13 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 14 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 14 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 14 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 15 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 15 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 15 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]


OUTPUT 16 NOZZLE TYPE: Please choose a nozzle type and length
Select a Nozzle Type:
Select a Nozzle Length: in (15.24mm)






OUTPUT 16 HOSE TYPE: Please select your system's hose type.
Hose Type:
Hose Length: ft (1.524m)

Standard Duty - Plastic Coaxial
Dual Channel - air and fluid remain separate until nozzle end
  • flexible
  • inexpensive
  • can melt
  • subject to crimping/crushing

hrule

Extreme Duty - Braided Stainless
Dual Channel - air and fluid remain separate until nozzle end
  • resists heat
  • resists kinks
  • durable
  • less flexible
  • expensive
  • resists hot chips

hrule

Sawing - Plastic Single Line
Single Channel - air and fluid mixed in hose
  • flexible
  • inexpensive
  • can melt
  • coiled option
  • slower mix response


OUTPUT 16 MOUNTING: Please choose a mounting option for this output.
Count: 37

Learn About Mounting Options
[ click for more info ]

. . . What now?
 

Get a quote - Receive a quote from Unist on your configured system


Save/Send to yourself - Send your build to yourself including a link to continue where you left off. ( optional: enter multiple addresses separated by commas )
 

Print - Print a summary of your finished system. (opens in a new window)

Get a quote on your system!

* *
*  
* *
* *
* *
* *



©Copyright 2018 Unist, Inc.