Production Machining: Getting the Most from MQL

Nov 9, 2017 | General | admin

Article from Production Machining offers a broad view of minimum quantity lubrication along with a closer look at using MQL in turning applications.


Article written by Production Machining's Senior Editor, Chris Felix

https://www.productionmachining.com/articles/getting-the-most-from-mql

Machining generates heat, and flood coolant is the common method to alleviate this heat. But flood coolant is a brute force solution that raises a host of issues of its own. Large quantities of coolant require specialized equipment to circulate, filter and test, and the purchase, maintenance and operation of this equipment can be expensive. The use of coolant may also cause thermal shock to carbide tools, resulting in microscopic cracks that weaken the tool and can ultimately lead to tool failure. Water-based coolants are also susceptible to bacterial growth. Biocides help with this issue, but who wants to breathe these biocides as they and the coolant are projected into the air during the cutting process? The fluid also often ends up in the wrong places, such as on floors, equipment and machine operators.

What if there was another way? While flooding the cutting zone with coolant may eliminate the symptoms of the problem (the heat), it does not address one of the main causes of the heat: friction.

Read full article

Return

Call Unist:
800.253.5462 Toll-free US & CAN
616.949.0853 Intl.

Apex Coil Lubrication System

Unrivaled output precision with PLC-based control and active monitoring. Remote monitoring with ethernet connectivity. Positive displacement pump allows for consistent output regardless of ambient temperature.
 
 

Cupping Press Coil Lubrication System

Precise control of application of cupping lubricants. Features high reliability, low maintenance and years of exceptional performance.
 
 

Sheet Lubrication System

Designed for sheet-fed presses in can end making applications - delivers consistent lubricant to sheet stock.
 
 

Tab Stock Lubrication System

Precision lubrication for narrow coil commonly used in tab making.
 
 


©Copyright 2017 Unist, Inc.