At Unist we highly recommend that you use roller systems as your primary means for applying lubricants in your metalforming operations. Sometimes it is necessary to spot lube certain areas. Unist offers a complete line of spray nozzles that connect directly to valves on the SPR-2000™ and SPR-2000 JR™ Programmable Fluid Controllers.
These nozzles work best with water-based solutions and emulsions and generally are not recommended for use with oils or viscous synthetic fluids. If you need to apply a more viscous fluid, contact us.
Low Volume Spray Nozzle delivers a consistent and controlled spray pattern for applications where a precision spray pattern is required. The air and fluid volumes are controlled independently at each nozzle with precision needle valves, allowing you to fine tune the spray to your specific needs. An integral valve at the nozzle tip means our system features immediate on and off control, which eliminates lag and prevents messy fluid drips.
Flexible Plastic Nozzle assembly stays steady despite machine vibrations. Uses a 12 in. (305 mm) long section of Loc-Line for positioning the Stainless Steel Nozzle tip with various spray pattern options. The magnetic base makes it easy to mount to your equipment. The quick-disconnect couplings plug directly into a valve on the SPR-2000™ or SPR-2000 JR™.
Articulated Arm Nozzle adjusts and locks into position with the turn of one knob. Features Stainless Steel Nozzle with various spray pattern options; magnetic mounting base; quick-disconnect couplings for easy connections to the SPR-2000™ or SPR-2000 JR™.