OEM's
WEAR POINT LUBRICATION
TUBE BENDING
FLUID DISPENSING OR SPRAYING
COATING SYSTEM
 
 
 
SPR-2000JR
phone
800.253.5462
chat

SPR-2000JR
watch video
download brochure
download user manual or SDS
get quote
add to list

SPR-2000JR

SPR-2000JR

The SPR-2000 JR programmable fluid controller is designed as a less costly alternative to the standard SPR-2000 programmable fluid controller. With many of the same features and functions as its more capable sibling, it can serve as the fl uid control system for any application where only two outputs are required.

Get a quote
  Get a Quote

Features
  • User-friendly controller
  • program up to 250 different die sets or jobs
  • Alarm monitoring of critical parameters
  • Controls up to 2 outputs
  • Stores up to 250 setups/jobs
  • Access code prevents tampering
  • Saves fluid: precisely controls output
Technical Specifications

    Power supply:
    • 110 VAC, 50/60 Hz or 220 VAC, 50/60 Hz

    Control inputs:
    • Dry contact (switch closure) Proximity sensor 10-30 VDC NPN, N.O. 24 VDC option for input #1

    Alarm inputs:
    • Dry contact (switch closure) Proximity sensor 10-30 VDC NPN, N.O.

    Flow monitor inputs:
    • Dry contact (switch closure) Proximity sensor 10-30 VDC NPN, N.O.

    Outputs:
    • Same voltage as power supply Maximum power - 10 watts per output

    Valves:
    • 1,2

    Alarm relay:
    • Isolated, non-fused, single pole, double throw; 2 amp load maximum

    Maximum input rate:
    • 50 cycles/second at 50% duty cycle Minimum contact open or closed time: 10 milliseconds

    Alarm inputs:
    • Dry contact (switch closure) Proximity sensor 10-30 VDC NPN, N.O.

    Programmable ranges:
    • Count (CNT): 0-255 counts Delay (DEL): 0-100 seconds (.010 second increments) Duration (DUR): 0-100 seconds

    Fuses:
    • Supply fuse: 2 amp
    • Output fuse: 5 amp

    Operating temperature range:
    • 0° to +50°C (+32° to +122°F)

    Storage temp range:
    • -20° to +70°C (-4° to +158°F)

    Storage:
    • Max 60 setups/jobs

    Power:
    • 120VAC - 50/60hz or 240VAC - 50/60hz

    Mounting:
    • SPR-2000 Stand

    Options & Accessories

    Supply & Connections
    In-die quick connect
    In-die quick connect
    Allows for permanent spray nozzle mounting to the die. Ensures nozzles remain in correct position with each die change.
    more

    Fluid Supply Systems
    Fluid Supply Systems
    Your fluid application system needs a steady supply of pressurized fluid. Unist offers a broad range of options to meet your needs.
    more

    SPR-2000JR programmable fluid controller
    2 Output fluid controller

    The economically priced SPR-2000 JR programmable fluid controller keeps costs down when only two outputs are required. The SPR-2000 JR controls fluid flow to one of these Unist systems: Uni-Roller® Type S (up to 18in. wide), Mini-Roller, Powered Uni-Roller® (up to 18in. wide) and/or Low Volume Spray Nozzles (1 or 2 nozzles).


    The system intermittently actuates two fluid solenoid valves that dispense the required quantity of fluid to two specific lube points. The valve actuation is determined by production line rates so there is no under or over lubrication whether it is a stamping press or continuous speed operation such as roll forming.




    • Monitors critical parameters
    • Precision fluid control
    • Controls 2 outputs
    • Stores up to 60 different setups/jobs
    • Access code prevents tampering
    • Economical fluid controller option
    SPR2000JR application

    Typical SPR-2000 JR / Uni-Roller® application





    save 50 percent

    Combine the SPR-2000 JR with a Uni-Roller® applicator to reduce fluid usage and save money

    On average, a Unist system can reduce stamping fluid consumption by 50% with some customers reporting reductions as high as 90%!




    Full-featured monitoring

    The SPR-2000 JR provides full-featured monitoring of critical parameters such as fluid level, pressure and flow (optional sensors are required) and alerts users with an audible alarm and red LED. An external alarm relay can also be wired directly to a press control.

    alarm
    Easy set up with intuitive menus

    access code screenAccess code menu

    Provides password-protected access to the system's setting.

    auto setup screenAuto setup menu

    prompts the user for job specifications and automatically creates a new setup (program) for Uni-Roller® applications.


    edit screenEdit menu

    allows the user to modify current setups and program spray nozzles or otehr auxillary functions.

    alarm screenAlarm menu

    allows the user to monitor critical system functions.





    Delivers return on investment in less than 6 months

    That's what many of our customers report. By applying the proper amount of fluid, the combination of an SPR-2000 JR controller and Uni-Roller® lubricator uses 50 to 90% less lubricant. Plus it decreases the mess, the parts cleaning, fluid recycling and costs associated with in-die spray systems, rag technology and externally lubricated rollers.


    main content goes here!