Eliminate downtime caused by unlubricated wear-points and streamline grease application in assembly processes with the 230 Grease Micro Pump™. Automate manual grease application, ensuring precise and repeatable output at any desired interval.
Precision dosing
Control your grease output down to the microliter.
Easy to refill
Refill reservoir with standard grease gun.
Self-priming
Minimize downtime with self priming pumps
Built tough
To perform in harsh industrial environments.
Highly configurable
Many configuration options to fit your application.
| Pump output and cycle rate |
▪ 20µl: 720 mL/hr, 600 cycles/min*
▪ 40µl: 1200mL/hr, 500 cycles/min*
▪ 60µl: 1800 mL/hr, 500 cycles/min*
|
| Pump timer (pneumatic pulse generator) |
▪ Recommended: 5-50 pulses/minute
▪ Maximum: 200 pulses/minute (not recommended for continuous operation)
|
| Pump timer (electronic PulseR™) |
▪ Recommended 5-50 Cycles per minute (Modes 1 & 2 on the Pulse R™)
▪ Maximum: 250 cycles/minute
|
| Flow sensor | PNP sensor, 5-28VDC |
| Air flow rate | 0-4.7 SCFM (0-131 LPM) for each air and oil output. 1-2 SCFM (28-56 LPM) typical |
| Operating temperature | 32°-122°F (0°-50°C) |
| Storage temperature | 4°-158°F (-16°-70°C) |
| Fluid viscosity | NLGI Grade 000 - NLGI Grade 3 greases |
| Supply air pressure | Clean, dry compressed air, 80-100 psi (4-7 bar) |
| Direct pump actuation On/Off timer | 0.030s minimum on time/ 0.070s minimum off time* |
Speak directly with our experts about your specific needs.
