Designed specifically for can makers, the Apex™ system features unmatched precision, control, and safety. Ensure accurate delivery and application of cupping lubricants while receiving comprehensive lubrication tracking and advanced monitoring features that set it apart from any other system.
Critical info at a glance
View all critical runtime information in one central location. The home screen can be used to monitor the system and troubleshoot issues.
Active monitoring
The Unist Apex™ monitors all critical runtime parameters and alerts the user of potential problems and stops the press when critical issues arise.
Alarm history
The Unist Apex™ displays a history of the previous 20 alarms for troubleshooting help and downtime diagnosis.
Manual setup
Manual control allows the user to easily perform regular maintenance and troubleshooting procedures on the Apex™ system.
Easy roller setup
Changing the amount of lubricant applied to the coil stock has never been easier than with the Apex™ system's roller setup screen.
Fluid totalizer
The Unist Apex™ tracks total lubricant dispensed and can be reset to monitor lubricant consumed during a time interval of your choosing.
| Interface | Allen Bradley 7" color touchscreen |
| Fluid output range | 10 to 60 mg/ft2 (161-645 mg/m2) typical |
| Fluid outputs | Up to 16 |
| Operating Environment |
▪ 32 to 122 °F (0 to 50 °C)
▪ 5 – 95% relative humidity, non-condensing
|
| Fluid Capacity | 6 US gal (22.7 L) |
| Fluid type(s) | Neat cupping lubricants for aluminum containers |
| Fluid supply options |
▪ Pressurized central fluid supply: 10-50 psi (0.7 0 3.4 bar)
▪ Day tank, drum, or tote: storage vessel placed next to unit to pump from
▪ Manual refill: Internal tank with filler cap
|
| Air supply | Clean, dry, compressed air: 80-90 psi (5.5 - 6.2 bar). 25 SCFM (708 SLPM) minimum |
| Power Requirement |
▪ 120 VAC, 1A, 50/60 Hz, Single phase, TN supply system, OR
▪ 240 VAC, 0.5A, 50/60 Hz, Single phase, TN supply system, OR
▪ 24 VDC, 5A max
|
| Control Input |
▪ Cycle Input: 10-30VDC PNP or Dry Contact (switch closure)
▪ Line Running: Dry contact switch from the press; Open circuit when running. Closed circuit when stopped
|
| Alarm Output | One N/C alarm (output NC), one N/O alarm (output NO) Isolated, non-fused, single pole, double throw 2 amp maximum load |
Speak directly with our experts about your specific needs
