Name: Saw Blade Lube System™
Brand: Unist

Overview

Technical

Support

Sample Request

Improve blade life & eliminate messy coolant

Unist Saw Blade Lube Systems^™ deliver all the benefits of MQL (Minimum Quantity Lubrication) to your band or circular saw in a durable and easy to install package. Longer lasting blades, better cuts, fluid savings, and clean, dry chips are the main reasons users love our Saw Blade Lube Systems^™ , especially when paired Coolube^® lubricant.

If you’re currently using a traditional flood coolant system, make the switch to a Unist Saw Blade Lube System^™ and eliminate the mess of coolants, their health/safety concerns, and the need for proper treatment and disposal.

▶

Saw Blade Lube System™ Benefits

Use as little as 2–4 ounces per shift

Eliminate messy flood coolant treatment & disposal

Improve blade life up to 500% and prevent galling

Increase the value of chips/swarf that are virtually dry

Keep operators happy with skin-friendly Coolube® lubricant

Pumps are warrantied for life when used exclusively with Coolube®

Typical Applications

Circular
Saw

Horizontal
Bandsaw

Vertical
Band Saw

Features

Unist MQL Systems separate air & fluid adjustment

Separate air & fluid adjustment
Dial in the perfect atomized spray for your application.

Tough, durable construction
Built to deliver years of performance in harsh industrial applications.

Unist Saw Blade Lube System easy installation

Compatible with all saw blades
Get sawing quickly with straightforward installation and easy setup

Coolube® Lifetime Pump Warranty

Use any type of Unist Coolube® exclusively and enjoy a lifetime pump warranty on Unist systems
Warranty details

Options

Actuation Actuate system with air pilot, solenoid, manual or foot valve. Optional digital output controller.

Pump size and style Fixed or adjustable pumps with 20, 40, or 60 µL outputs

Multiple outputs Up to 16 individual outputs. Outputs can be controlled in groups or independently.

Nozzles

Nozzles for all blade types and widths, including bearing/guide lubrication.

Explore options

Reservoirs 16, 32, and 64 oz reservoirs. Also compatible with a remote pressurized fluid source

Low level switch Consists of a float and a switch inside the reservoir

Related Products

Coolube®

Advanced metal cutting lubricant

Coolubricator™

Lubrication for continuous processes

Serv-O-Spray™

Delivers precise intermittent shots of lubrication

Minimum Quantity Lubrication Nozzles

Spray nozzles for MQL applications

Find the right sawing lubrication solution for you!

Want to read more?

View Technical Information

Specifications

Pump output at full stroke	▪ 1-drop standard: 0.033 mL ▪ 3-drop standard: 0.100 mL ▪ 1-drop MV: 0.045 mL ▪ 2-drop MV: 0.100 mL
Pump output rate	▪ 1-drop standard: 0-396 mL/hr ▪ 3-drop standard: 0-1200 mL/hr ▪ 1-drop MV: 0-540 mL/hr ▪ 2-drop MV: 0-1200 mL/hr
Air flow rate	▪ 1-2 SCFM (28-56 LPM) typical for each air and oil output ▪ 3 SCFM (85 LPM) max
Pump timer frequency	▪ Recommended: 5-50 cycles per minute ▪ (Modes 1 & 2 on the Pulse R™) ▪ Maximum: 200 cycles/minute ▪ (not recommended for continuous operation)
Operating temperature storage	32˚-122˚F (0˚-50˚C)
Storage temperature range	4˚-158˚F (-16˚–70˚C)
Fluid reservoir capacity	▪ Reservoir dependent, 16-64 oz (473-1893 mL) ▪ Fluid supplied through air trap: clean, filtered fluid, 10 psi (0.69 bar) max

Requirements

Supply Air / Pressure	Clean, dry, filtered air at 60–100 psi (4–7 bar)
Fluid viscosity	▪ 1-drop standard: 50-1000 SUS ▪ 3-drop standard: 50-1000 SUS ▪ 1-drop MV: 30-1300 SUS ▪ 2-drop MV: 30-500 SUS
Air Pilot Valve Signal (if equipped)	25 psi (1.7 bar) minimum
External Pressurized Fluid Source (if equipped)	5–10 psi (0.34–0.69 bar)
Pulse R™ Voltage (if equipped)	24VDC +/- 10%
Solenoid Voltage (if equipped)	12VDC or 24VDC, 24V-60/50Hz, 110V-50Hz , 120V-60Hz, 220V-50Hz, 240V-60Hz