EQUIPMENT MAINTENANCE LUBRICATION

Precision fluid and grease dispensing for spot applications and equipment lube points.

 
ASSEMBLY / PART LUBRICATION

Precise fluid application with manual or PLC control for assembly processes and OEM systems.

 
WHAT IS PRECISION FLUID DISPENSING?

What is the benefit of positive displacement? How do atomized air spray systems work?

 

 
Home   »   Info & Support   »   Video

Video


Powered Roller Cart™ in action
Selected Video
Powered Roller Cart™ in action
The Powered Roller Cart™ is a mobile lubrication solution for blank/sheet stock.

How-to

MQL On CNC Lathes Implementing and enjoying the benefits of MQL on a CNC lathe are simple, and worth the investment.

MQL On CNC Lathes
This video briefly runs through MQL (Minimum Quantity Lubrication) on CNC Lathes. Implementing and enjoying the benefits of MQL on a CNC lathe are simple, and worth the investment. Unist has successfully implemented MQL on many lathes performing a variety of operations in a variety of materials. Contact Unist today to learn more about how we can help improve your manufacturing processes through the use of MQL on your CNC lathe.



Configuring factory settings on the SmartFlow<sup>®</sup> controller. This video explains how to configure factory settings on your SmartFlow<sup>®</sup> controller.

Configuring factory settings on the SmartFlow® controller.
Factory settings are typically set by Unist before shipping a unit to a customer. There may be times when configuring factory settings is necessary such as when the initial application was not known at time of shipping or after a factory reset. This video explains how to configure factory settings on your SmartFlow® controller



Configuring installation settings on the SmartFlow<sup>®</sup> controller. Learn how to access and configure installation settings.

Configuring installation settings on the SmartFlow® controller.
Installation settings must be properly set so that the controller is tailored for your application. Watch this video to learn how to access and configure these settings.



Creating a new job on the SmartFlow<sup>®</sup> controller. Creating a new job is a simple and intuitive process with SmartFlow<sup>®</sup>

Creating a new job on the SmartFlow® controller.
Creating a job on the SmartFlow® is simple and intuitive. Learn how to use the job setup wizard to guide you through creating a new job specific to your application.



Editing an existing job on the SmartFlow<sup>®</sup> controller. Editing an existing job is a simple and intuitive process with SmartFlow<sup>®</sup>

Editing an existing job on the SmartFlow® controller.
Making edits to existing jobs is easy with SmartFlow®. Watch this video to learn how to adjust your lubricant settings, nozzle timing, material width, and more.



Editing alarm settings on the SmartFlow<sup>®</sup> controller Learn how to edit the alarm settings on a  SmartFlow<sup>®</sup> controlller

Editing alarm settings on the SmartFlow® controller
SmartFlow® monitors all critical process parameters. Sometimes, the alarm trigger points need to be adjusted for a specific application. Learn how to properly configure alarm settings in this video.



Monitoring the inputs and outputs on the SmartFlow<sup>®</sup> Controller This video shows you how to monitor the inputs and outputs on the SmartFlow<sup>®</sup> controller.

Monitoring the inputs and outputs on the SmartFlow® Controller
The SmartFlow® allows user to directly view the status of any input or output. This is a useful tool for installation and troubleshooting. Watch this video to learn how to use it.



Performing a flow test on the SmartFlow<sup>®</sup> controller This video shows you how to perform a flow test on the SmartFlow<sup>®</sup> controller.

Performing a flow test on the SmartFlow® controller
Performing a fluid flow test is a critical step when installing the SmartFlow®. Learn how the SmartFlow® makes this process quick and easy.



Running, deleting, and exporting a job on the SmartFlow<sup>®</sup> controller This video shows you how to run, delete, and export a job on the SmartFlow<sup>®</sup> controller.

Running, deleting, and exporting a job on the SmartFlow® controller
The SmartFlow® can save up to 250 jobs. Learn how to run, delete, or export a job to another controller.



Updating firmware on the SmartFlow<sup>®</sup> controller This video shows you how to update the firmware on the SmartFlow<sup>®</sup> controller.

Updating firmware on the SmartFlow® controller
Occasionally we may need to update the firmware on the controller with bug fixes or new software features. Watch this video to learn how to update the firmware on your SmartFlow® controller.



Using the SmartFlow<sup>®</sup> to prime the Uni-Roller<sup>®</sup> S2 This video shows you how to prime your Uni-Roller<sup>®</sup> S2 using the SmartFlow<sup>®</sup> controller.

Using the SmartFlow® to prime the Uni-Roller® S2
When using a Uni-Roller®, properly priming the rollers is an important start up task. Watch this video to learn how the SmartFlow® walks you through priming rollers.



Rebuilding MV Pumps

Rebuilding MV Pumps
Learn how to rebuild your MV (Multi-Viscosity) pumps.



Setting Up Your Coolubricator System

Setting Up Your Coolubricator System
Learn how to do initial setup on a Coolubricator™ system.



Prime and calibrate Revolution System

Prime and calibrate Revolution System
Learn how to prime and calibrate the Revolution™ system



Changing Roller Covers on a Uni-Roller S2

Changing Roller Covers on a Uni-Roller S2
This video shows how to easily remove the Uni-Roller S2's rollers for maintenance.



Basic Overview:  Turning with MQL

Basic Overview: Turning with MQL
This video briefly runs through MQL (Minimum Quantity Lubrication) on CNC Lathes.



Tips & Tricks of Working with Coaxial Tubing

Tips & Tricks of Working with Coaxial Tubing
Learn tips for working with coaxial tubing.



Disconnecting & connecting co-axial hose

Disconnecting & connecting co-axial hose
This video demonstrates the proper procedure for installing and removing co-axial hose from a Unist MQL (Minimum Quantity Lubrication) system.



Installing a Uni-Max Pump Rebuild Kit

Installing a Uni-Max Pump Rebuild Kit
In this how-to video, the installation procedure for a standard Uni-Max Pump rebuild kit is outlined.



Priming A Pump-Based MQL System

Priming A Pump-Based MQL System
In this how-to video, the procedure for priming a pump-based MQL systems is outlined



Rebuild a Uni-Roller Pump Type C

Rebuild a Uni-Roller Pump Type C
Learn how to rebuild the cam-driven pump in a Uni-Roller® Type C stock lubricator.



Installing Coax Nozzles & Splicer Pins

Installing Coax Nozzles & Splicer Pins
This video demonstrates how to install co-axial nozzles and splicer pins in a Unist MQL system.



SPR-2000: Making Electrical Connections

SPR-2000: Making Electrical Connections
Learn how to make electrical connections to the SPR-2000™ programmable fluid controller.



Changing a Roller Cover (Uni-Roller)

Changing a Roller Cover (Uni-Roller)
A how-to video explaining how to change roller covers in a Uni-Roller® stock lubricator.



Changing Roller Covers (Mini-Roller)

Changing Roller Covers (Mini-Roller)
A how-to video explaining how to change roller covers in a Mini-Roller™ stock lubricator.



Perform a Flow Test with SPR-2000

Perform a Flow Test with SPR-2000
In this how-to video, the process of performing a flow test with an SPR-2000™ programmable fluid controller is demonstrated.



Quantum:  Calibrating Flow Sensors Quantum:  Calibrating Flow Sensors

Quantum: Calibrating Flow Sensors
Learn how to calibrate flow sensors on the Quantum™ system from Unist



Working With The Redesigned Capillary Splicer

Working With The Redesigned Capillary Splicer
Learn how to replace nozzles, shorten or replace co-axial hose or retrofit your system to use the improved capillary splicer design.



MQL Minute

MQL Minute #1 MQL Systems Overview

MQL Minute #1
This MQL Minute provides a general overview of Unist MQL (Minimum Quantity Lubrication) systems.



MQL Minute #2 Coolube Vs Flood Coolant

MQL Minute #2
In this MQL Minute, John and Larry discuss the benefits of Coolube® vs. traditional flood coolant.



MQL Minute #3 Dry Chips With Unist MQL

MQL Minute #3
John and Larry take a look at some dry chips in the Unist shop.



MQL Minute #4 Coolubricator VS Serv-O-Spray

MQL Minute #4
In this MQL Minute, John and Larry discuss the differences between Unist Coolubricator™ and Serv-O-Spray™ systems



MQL Minute #5 Bat Nozzle for Sawing

MQL Minute #5
Learn about Unist's specialty BAT nozzle for sawing in this MQL Minute.



MQL Minute #6 Nozzle Positioning for Milling

MQL Minute #6
Learn how to best position your nozzles for milling operations in this MQL Minute.



MQL Minute #7 Multi-Viscosity Pumps

MQL Minute #7
Unist multi-viscosity (MV) pumps are discussed in this MQL Minute.



MQL Minute #8 LV Nozzle

MQL Minute #8
Learn about Unist's Low Volume (LV) nozzle in this MQL Minute.



MQL Minute #9 Multiple Outputs

MQL Minute #9
In this MQL Minute, John and Larry discuss Unist MQL systems with multiple outputs.



MQL Minute #10 Dual/Single Channel MQL

MQL Minute #10
Learn the difference between single-channel and dual-channel MQL



Metal Forming Minute

MF Minute #1 Uni-Roller Systems Overview

MF Minute #1
In this Metal Forming Minute, John and Mark provide a basic overview of the Uni-Roller® line of stock lubricators.



MF Minute #2 Unist Mini-Roller

MF Minute #2
In this Metal Forming Minute, John and Mark discuss Unist's Mini-Roller™ stock lubricator for narrow coil.



MF Minute #3 SPR-2000 Fluid Controller

MF Minute #3
John and Mark discuss the SPR-2000™ programmable fluid controller.



MF Minute #4 Adequate Stock Lubrication

MF Minute #4
John and Mark discuss the importance of adequate stock lubrication.



MF Minute #5 SPR-2000: Creating Setups

MF Minute #5
Learn how to create setups (jobs) in this installment of the Metal Forming Minute



MF Minute #6 The New Unist Apex System

MF Minute #6
Discover the Unist Apex™ System in this Metal Forming Minute.



MF Minute #7 Clearing a low fluid alarm on the SPR-2000

MF Minute #7
This Metalforming Minute demonstrates how to clear a low-fluid alarm on the SPR-2000™ programmable fluid controller.



MF Minute #8 Uni-Roller HG System

MF Minute #8
Take a look at the new 'HG' option for Uni-Rollers® in this Metal Forming Minute.



MF Minute #9 Uni-Blend System

MF Minute #9
An introduction to the Uni-Blend™ fluid mixing system.



Testimonials

Testimonial Video - Grant Industries Customer Grant Industries discusses their Unist Uni-Roller system.

Testimonial Video - Grant Industries
Customer Grant Industries discusses their Unist Uni-Roller system.



Testimonial Video - Sigma Machine Sigma Machine talks about the Unist Quantum™ and Coolube® lubricants.

Testimonial Video - Sigma Machine
Tia Stevenson from Sigma Machine talks about the Quantum™ and Coolube® lubricants.



list