Uni-Roller® S2 Powered

Blank coating solution


uni roller s2

The Uni-Roller® S2 Powered is the ultimate solution in blank stock lubrication. Combined with an SPR-2000™ or SPR-2000 JR™ programmable fluid controller, the S2 Powered will apply the correct amount of fluid for your application and do it consistently from one blank to the next.

    • Reduce lubricant consumption by 50% or more
    • Cleaner floors & work area
    • Quick-change rollers for easy maintenance

on a Uni-Roller S2 Powered system now!

Note: Is your installation location different? Please let us know below!
  • Yes - Send me important Unist news/updates!
    No - Don‘t send me important news/updates.

  • ( All fields are required. )

By clicking ‘submit’, you are confirming that you have read, understood, and accepted the Unist Privacy Policy.

  • Uni-Roller® S2 Powered applications:

    • Punching
    • Stamping
    • Fine blanking
    • Deep drawing
    • Application of rust preventives and other protective coatings
  • Delivers return on investment in less than 6 months

    That's what many of our customers report. By applying the proper amount of fluid, the Uni-Roller® S2 Powered lubricator uses 50 to 90% less lubricant for stock lubrication. Plus it decreases the mess, the parts cleaning, fluid recycling and costs associated with in-die spray systems, rag technology and externally lubricated rollers.

The internally-supplied difference

The internally-supplied rollers are essential to precisely applying the fluid. Inside each of the rollers is a dispenser tube with small holes placed along its length. Fluid is injected into the dispenser tubes from the fluid controller and dispensed across the inside of the rollers.

internally fed

The lubricant is transferred to the stock through durable polyester felt or polyurethane foam roller covers. These cover materials apply the lubricant smoothly and evenly across both the top and bottom of the stock.

The Uni-Roller® S2 Powered applies the exact amount of lubricant required. This eliminates the mess and waste associated with in-die spray systems and externally lubricated roller systems. The result is not only a cleaner shop, but also significant savings from decreased fluid waste, improved die life, better part quality and increased machine up-time. Many customers have reported savings resulting in a return on investment of less than six months!


The brushed stainless steel guards protect the rollers and guide material when loading coil stock or feeding blanks. With the guards removed for better access, a roller can be changed in about a minute using a single wrench. The Uni-Roller® S2 Powered is built to handle any manufacturing environment without sacrificing ease of maintenance.

  • single roller entry side
  • single roller exit side

Built to fit your application

A single roller set is used for widths of 18” [457.2 mm] or less where the lower roller is directly driven. For blanks over 18” [457.2 mm] wide, multiple 12” [304.8 mm] wide roller sets are staggered and overlapped. Each lower roller is driven by a heavy-duty chain from a central shaft.

  • single roller dimensions
    Single roller coverage of 12” [304.8 mm] to 18” [457.2 mm]
    Roller coverageA (extrusion length)B (overall width)
    3” [76.2 mm] 12” [304.8 mm] 14.24” [361.7 mm]
    6” [152.4 mm] 12” [304.8 mm] 20.24” [514.1 mm]
    12” [304.8 mm] 18” [457.2 mm] 26.24” [666.5 mm]
    18” [457.2 mm] 24” [609.6 mm] 32.24” [818.9 mm]
  • Multiple rollers (coverage over 18”) [457.2 mm]
    Roller coverageA (extrusion length)B (overall width)
    23” [596.9 mm] 30” [762 mm] 41.18” [1046.0 mm]
    35” [596.9 mm] 42” [1066.8 mm] 53.18” [1350.8 mm]
    46.5” [1181.1 mm] 54” [1371.6 mm] 65.18” [1655.6 mm]
    58” [1473.2 mm] 66” [1676.4 mm] 77.18” [1960.4 mm]
    69.5” [1765.3 mm] 78” [1981.2 mm] 89.18” [2265.2 mm]

Available options

  • polyester felt rollerPolyester felt cover
    Extremely durable and compatible with a broad range of fluids

  • polyurethane foam coverPolyurethane foam cover
    Useful when sequence of stock widths used causes uneven wear on cover. consult Unist for fluid compatibility.

  • Standard fluid dispenser tubeStandard fluid dispenser tube
    Best choice for most applications with the widest range of fluid compatibility and flow rates.

  • Low volume fluid dispenser tubeLow volume fluid dispenser tube
    For use in applications requiring coverage of 50 mg/ft2 [538 mg/m2] or less.

  • Variable speed DC driveVariable speed DC drive
    Manual speed control through a potentiometer for speeds up to 145 feet/min [44 m/min]

  • AC variable frequency driveAC variable frequency drive
    Automated speed control for speeds up to 150 feet/min (46 m/min). Not available on single roller units.

Take control with the SPR-2000

The Uni-Roller® S2 Powered lubricator uses a photo eye sensor to detect blanks and provides an input to the SPR-2000™ programmable fluid controller.

The SPR-2000™ alerts you to issues before they become expensive problems that interrupt or stop your production lines. With the SPR-2000™ you’ll know immediately if the fluid supply runs low, if fluid pressure varies, or if flow to the applicator is interrupted (Level, pressure, and flow sensors required). The SPR-2000™ features an intuitive, easy-to-use interface as well as an access code to prevent unauthorized tampering or changes in fluid settings.


  • small spr
    • Monitors critical parameters
    • Controls up to 22 outputs
    • Stores up to 250 setups
    Prime button for easy priming of the felt application pads.
  • Visual and audio alarm notification plus an alarm relay output for integration.
    Access code prevents tampering by unauthorized personnel.


Stock type: blank stock

Stock thickness: .005”-.25” (.13mm – 6.35mm)

Stock width: 3" - 72" and up (76mm - 1828mm). Contact Unist.

Fluid type(s): For use with a broad range of water soluble and neat lubricants. Viscosity from 30 – 1000 SUS. Thicker lubricants can be tested by Unist for compatibility.

Fluid supply: pressurized 3 gal(11.4L), 6 gal(22.7L), 15 gal(56.8L), 30 gal(113.6L) tank. Also 20 gal(75.7L) poly tank with diaphragm pump. Also can be integrated into customer’s bulk fluid system

Applicator material: polyester felt or polyurethane foam

Controller: SPR-2000 or SPR-2000JR

Power: NA (see SPR-2000 or SPR-2000 JR for controller power requirements)

Mounting: 5/16-18 t-nuts supplied in bottom extrusion slots allow for multiple mounting options. 2 t-nuts per slot provided.

Air: Clean, dry, compressed air, 80-100 psi (5.5-6.9 bar),10 SCFM (280 SLPM) minimum

Dimensions: ( see diagram above )

Call Unist:
800.253.5462 Toll-free US & CAN
616.949.0853 Intl.
Need Help? Let's chat!

calculate your savings with Uni-Roller!

More Metal Forming Solutions

Sign up for news

©Copyright 2018 Unist, Inc.