Wearpoint Lubrication System

Lubrication precision

 

  • Systems reduce costly mechanical wear and downtime

    • Reduces bearing and mechanical wear
    • Reduces downtime
    • Unlimited configurations available
    • Prevents damaging friction build-up
    • Applies precise amounts of lubricant
  • wearpoint lube system

Solve your wearpoint lubrication problems

With nearly unlimited configurations available, Unist can provide you with a wearpoint lubrication system that prevents damaging friction build-up for:

    • Bearings
    • Ball screws
    • Chains
    • Rails
    • Gears
    • Wipes
    • Wheel Flanges
    • Air motors
    • Cutting tools
    • Air cylinders
    • Welding electrodes
    • Journal bearings
    • Spindle bearings

 

questMark
GET A QUOTE
on a Wearpoint Lube system now!

Note: Is your installation location different? Please let us know below!

  • Join Unist mailing list
  • ( All fields are required. )
hrule

 

  • Inadequate lubrication = Increased maintenance

    Approximately 50 percent of bearing failures and 60 percent of mechanical failures can be tracked to inadequate or improper lubrication. Often there are so many wearpoints to lubricate that your standard maintenance procedures just can’t keep up with them all. But the price for not maintaining them can take an unecessary toll on your maintenance and repair budget.

  • Air/Oil 24/7 Wearpoint Lubrication Systems can stem this budget drain. It will apply timed, precise amounts of lubricant to reduce bearing and mechanical wear and downtime on your high speed and other conveyor or power transmission chains.

    Unist engineers will design the chain or conveyor lubrication system to automatically lubricate hundreds of wearpoints with the precise frequency and volume of air and lubricant needed. No wearpoints will be missed. None will be over lubricated.


Wearpoint Lubrication System Components

 

wearpoint lube system

 

Wearpoint Lubrication Systems Options


  • solenoid valveSolenoid valve

    24 - 240 VAC
    or
    12 - 24 VDC

  • solenoid timerSolid state solenoid timer

    Provides periodic signal to operate oil metering pumps

  • air filterAir filter - ¼" NPT

    for water and particulate removal

  • pressure regulatorPressure regulator

    Provides periodic signal to operate oil metering pumps for adjustment of air pressure to lubrication points



Specifications of Chain & Conveyor Lubrication Systems:

Continuous Output – Pulse Generator = infinite cycling at an adjustable 5-200 pulse/min.

Additional Output – Drive up to 16 pumps for 16 individual output options

Air Valve Options – Control air input with Manual Valve, Air Pilot Valve, or 3-Way Solenoid Valve (available in 110 VAC or 24 VDC)

Pump Options – 3 types available:

  • 1 Drop (1/30 mL per stroke)
  • 3 Drop (1/10 mL per stroke)
  • Check Valve (for use with coolant or fluid with

Choice of reservoir capacity – 16 oz. (473mL) nylon reservoir standard

  • 10 oz. (296 ml), nylon
  • 16 oz. (473 ml), polyethylene
  • 32 oz. (946 ml), polyethylene
  • 64 oz. (1893 ml), polyethylene
  • 3 Gal. (11.3 L) stainless steel tank
  • 2 to 80 Gal. (7.5 L to 302 L) ASME rated tank
Call Unist:
800.253.5462 Toll-free US & CAN
616.949.0853 Intl.

Join the Unist mailing list!

news iconNews


©Copyright 2017 Unist, Inc.