Low volume spray nozzles deliver a consistent and controlled spray pattern. Evenly coat rough or intermittent surfaces. The air and fluid volumes are controlled independently by precision needle valves, allowing you to fine tune the spray to your specific needs.
Spray patterns
Fine control of conical or fan spray
Mounting configurations
Choose between standard adjustable mounts to custom modular configurations
Fine tune adjustments
Easily make fine tuned adjustments at the nozzle or remotely
Stock applicators require a pressurized fluid supply. We offer a range of options for size and configuration.
Control actuation with Smartflow® programmable fluid controller
| Maximum cycle rate | 200 cycles/min |
| Operating temp range | 40-150°F (4-65°C) |
| Body | Anodized aluminum |
| Needle valves | Stainless steel |
| Fittings | Nickel-plated brass |
| Fluid seal material | Fluorocarbon (Viton) |
| Air seal material | Nitrile (Buna-N) |
| Fluid supply |
▪ Pressurized 4 gal (15L)
▪ Pressurized 6 gal (22.7L)
▪ Pressurized 15 gal (56.8L)
▪ Pressurized 30 gal (113.6L)
▪ 20 gal (75.7L) poly tank with diaphragm pump
▪ Integration into customer’s bulk fluid system
|
| Nozzle actuation control | Solenoid valves on SmartFlow® programmable fluid controller OR customer-supplied PLC |
| Air supply pressure | 40-100 psi (2.76-7 Bar) Dry, filtered compressed air |
| Fluid supply pressure | 20-100 psi (1.4-7 Bar) |
| Fluid type | For use with a broad range of water soluble and neat lubricants. Viscosity from 30 – 1000 SUS. Thicker lubricants can be tested by Unist for compatibility |
Speak directly with our experts about your specific needs
