Take full control of your die and stock lubrication with Unist's SmartFlow® programmable fluid controller. Designed to provide fluid to a Uni-Roller® stock lubricator and/or in-die spray nozzles, the SmartFlow® features robust process monitoring capability and an easy-to-use interface that makes job setup simple and quick. The SmartFlow® removes fluid concerns from the equation and allows metal formers to focus on the forming process.
Touch Screen Interface
Easily access jobs, settings, maintenance reminders, and more. The intuitive menu allows for easy transition from box to production line
Process Monitoring
The SmartFlow® controller can monitor pressure, flow, valve performance and line status to ensure lubrication is delivered as required
Easily Create Jobs
The job setup wizard guides users through creating a job. Once created, simply increase or decrease the amount of lubricant desired for quick fine tuning of lubricant coatings.
Fluid Tracking
Directly measure how much fluid your process is consuming with advanced fluid tracking. Work smarter and know your exact lubricant cost per part
Control between 2 and 22 fluid outputs.
Note: Airless pray nozzles require a single output. Rollers require 2 outputs per roller set
Continuous monitoring of fluid level, air pressure, fluid flow,valve performance, and line status
Configurable alerts for:
Alarm interlock relay allows for connection to visual or audio annunciator
| Cycle inputs | 4 inputs, Dry contact (switch closure), or 10-30VDC NPN or PNP sensor |
| Maximum cycle input rate | 50 cycles/second at 50% duty cycle, minimum contact open or closed time: 10ms |
| Alarm inputs | 2 inputs, Dry contact (switch closure), or 10-30VDC NPN or PNP sensor |
| Outputs | Up to 22 outputs, 24VDC, 6.5 watts, for nozzles or rollers |
| Alarm interlock relay | Dry contact, normally open or normally closed, 2A max current |
| Press control interface | Modbus protocol over RS485 serial or ethernet |
| Job storage | 250 jobs |
| Job transfer | USB-A flash drive |
| Power supply |
▪ To integral transformer: 120VAC, 2.5A max or 240 VAC, 1.3A max, 50/60 Hz
▪ Direct to controls: 24VDC up to 150 watts
|
| Fluid supply | 10-100 psi (0.7-6.9) fluid pressure from a centralized fluid supply or pressurized tank. Typical fluid pressure is 30 psi (2.1 bar). |
| Storage temperature range | -4°F–158°F (-20°C–70°C) |
| Operating temperature range | 32°F–122°F (0°C–50°C) |
Talk directly with our experts about your specific needs.
