The New Unist Apex System
MQL On CNC Lathes
This video briefly runs through MQL (Minimum Quantity Lubrication) on CNC Lathes. Implementing and enjoying the benefits of MQL on a CNC lathe are simple, and worth the investment. Unist has successfully implemented MQL on many lathes performing a variety of operations in a variety of materials. Contact Unist today to learn more about how we can help improve your manufacturing processes through the use of MQL on your CNC lathe.
Configuring factory settings on the SmartFlow® controller.
Factory settings are typically set by Unist before shipping a unit to a customer. There may be times when configuring factory settings is necessary such as when the initial application was not known at time of shipping or after a factory reset. This video explains how to configure factory settings on your SmartFlow® controller
Configuring installation settings on the SmartFlow® controller.
Installation settings must be properly set so that the controller is tailored for your application. Watch this video to learn how to access and configure these settings.
Creating a new job on the SmartFlow® controller.
Creating a job on the SmartFlow® is simple and intuitive. Learn how to use the job setup wizard to guide you through creating a new job specific to your application.
Editing an existing job on the SmartFlow® controller.
Making edits to existing jobs is easy with SmartFlow®. Watch this video to learn how to adjust your lubricant settings, nozzle timing, material width, and more.
Editing alarm settings on the SmartFlow® controller
SmartFlow® monitors all critical process parameters. Sometimes, the alarm trigger points need to be adjusted for a specific application. Learn how to properly configure alarm settings in this video.
Monitoring the inputs and outputs on the SmartFlow® Controller
The SmartFlow® allows user to directly view the status of any input or output. This is a useful tool for installation and troubleshooting. Watch this video to learn how to use it.
Performing a flow test on the SmartFlow® controller
Performing a fluid flow test is a critical step when installing the SmartFlow®. Learn how the SmartFlow® makes this process quick and easy.
Running, deleting, and exporting a job on the SmartFlow® controller
The SmartFlow® can save up to 250 jobs. Learn how to run, delete, or export a job to another controller.
Updating firmware on the SmartFlow® controller
Occasionally we may need to update the firmware on the controller with bug fixes or new software features. Watch this video to learn how to update the firmware on your SmartFlow® controller.
Using the SmartFlow® to prime the Uni-Roller® S2
When using a Uni-Roller®, properly priming the rollers is an important start up task. Watch this video to learn how the SmartFlow® walks you through priming rollers.
Rebuilding MV Pumps
Learn how to rebuild your MV (Multi-Viscosity) pumps.
Setting Up Your Coolubricator System
Learn how to do initial setup on a Coolubricator™ system.
Prime and calibrate Revolution System
Learn how to prime and calibrate the Revolution™ system
Changing Roller Covers on a Uni-Roller S2
This video shows how to easily remove the Uni-Roller S2's rollers for maintenance.
Basic Overview: Turning with MQL
This video briefly runs through MQL (Minimum Quantity Lubrication) on CNC Lathes.
Tips & Tricks of Working with Coaxial Tubing
Learn tips for working with coaxial tubing.
Disconnecting & connecting co-axial hose
This video demonstrates the proper procedure for installing and removing co-axial hose from a Unist MQL (Minimum Quantity Lubrication) system.
Installing a Uni-Max Pump Rebuild Kit
In this how-to video, the installation procedure for a standard Uni-Max Pump rebuild kit is outlined.
Priming A Pump-Based MQL System
In this how-to video, the procedure for priming a pump-based MQL systems is outlined
Rebuild a Uni-Roller Pump Type C
Learn how to rebuild the cam-driven pump in a Uni-Roller® Type C stock lubricator.
Installing Coax Nozzles & Splicer Pins
This video demonstrates how to install co-axial nozzles and splicer pins in a Unist MQL system.
SPR-2000: Making Electrical Connections
Learn how to make electrical connections to the SPR-2000™ programmable fluid controller.
Changing a Roller Cover (Uni-Roller)
A how-to video explaining how to change roller covers in a Uni-Roller® stock lubricator.
Changing Roller Covers (Mini-Roller)
A how-to video explaining how to change roller covers in a Mini-Roller™ stock lubricator.
Perform a Flow Test with SPR-2000
In this how-to video, the process of performing a flow test with an SPR-2000™ programmable fluid controller is demonstrated.
Quantum: Calibrating Flow Sensors
Learn how to calibrate flow sensors on the Quantum™ system from Unist
Working With The Redesigned Capillary Splicer
Learn how to replace nozzles, shorten or replace co-axial hose or retrofit your system to use the improved capillary splicer design.
MQL Minute #1
This MQL Minute provides a general overview of Unist MQL (Minimum Quantity Lubrication) systems.
MQL Minute #2
In this MQL Minute, John and Larry discuss the benefits of Coolube® vs. traditional flood coolant.
MQL Minute #3
John and Larry take a look at some dry chips in the Unist shop.
MQL Minute #4
In this MQL Minute, John and Larry discuss the differences between Unist Coolubricator™ and Serv-O-Spray™ systems
MQL Minute #5
Learn about Unist's specialty BAT nozzle for sawing in this MQL Minute.
MQL Minute #6
Learn how to best position your nozzles for milling operations in this MQL Minute.
MQL Minute #7
Unist multi-viscosity (MV) pumps are discussed in this MQL Minute.
MQL Minute #8
Learn about Unist's Low Volume (LV) nozzle in this MQL Minute.
MQL Minute #9
In this MQL Minute, John and Larry discuss Unist MQL systems with multiple outputs.
MQL Minute #10
Learn the difference between single-channel and dual-channel MQL
Metal Forming Minute
MF Minute #1
In this Metal Forming Minute, John and Mark provide a basic overview of the Uni-Roller® line of stock lubricators.
MF Minute #2
In this Metal Forming Minute, John and Mark discuss Unist's Mini-Roller™ stock lubricator for narrow coil.
MF Minute #3
John and Mark discuss the SPR-2000™ programmable fluid controller.
MF Minute #4
John and Mark discuss the importance of adequate stock lubrication.
MF Minute #5
Learn how to create setups (jobs) in this installment of the Metal Forming Minute
MF Minute #6
Discover the Unist Apex™ System in this Metal Forming Minute.
MF Minute #7
This Metalforming Minute demonstrates how to clear a low-fluid alarm on the SPR-2000™ programmable fluid controller.
MF Minute #8
Take a look at the new 'HG' option for Uni-Rollers® in this Metal Forming Minute.
MF Minute #9
An introduction to the Uni-Blend™ fluid mixing system.
Testimonial Video - Grant Industries
Customer Grant Industries discusses their Unist Uni-Roller system.
Testimonial Video - Sigma Machine
Tia Stevenson from Sigma Machine talks about the Quantum™ and Coolube® lubricants.